Unsupported Blanket Stitch Binding - Book No 0013

It's been a while since I've posted. This is what I've been working on. A Keith Smith binding that he calls the Unsupported Stitch Binding. (see Vol 3, pg 219). I've modified it slightly, in that I've stepped the length of each alternate stitch.

As the sewings aren't linked to one another, I used 2 colours of thread, alternatively brown and black. The pages are made with alternate sheets made from my own handmade papers 0001 & 0002. The ply boards i made from a cheap crate i found at the local garden centre - it was one of their free boxes to help you carry your plants home in, but the ply base has particularly attractive grain pattern.

I don't consider this book a complete success. I used both straight and curved needles, but i couldn't get the boards tight. This shows up in the second image, you can see the bottom board is loose. The back board, the last to be sewn, is particularly loose. More practice needed I guess!

Book No 0013. 4x6 inches (10x15 cms)

Swap No 0005 - My Handbound Books

Over to Canada this time, to Rhonda at My Handbound Books. I was a little slow off the mark in posting my end of the swap, and consequently, my package from Rhonda arrived before I'd posted mine!

But, i was blown away with Rhonda's generosity. I received 2 chopstick bound books, beautifully wrapped in a handmade, hand printed band. See Rhonda's tutorial to make these here. There was also another notebook, a print, and a selection of marbled and paste papers. All are stunning. Rhonda's tutorial to make paste paper is here.

I thoroughly reccomend Rhonda's blog, its fascinating, and an inspiration. Theres so much on there that I'd like to try and make myself. If mine are only half as good........

I sent Rhonda my usual swap, but as I'd seen what Rhonda had posted before I sent mine, I included one paper from each of the six papers I've made, and as a special treat, I sent Rhonda a pair of the wooden boards I'd made and kept for a rainy day. I'm looking forward to see what Rhonda makes with them.

My Series of Books so Far

And, finally for tonight, a self indulgent hastily thrown together view of some of my books made so far. I like seeing other peoples 'bookshelves', so I thought i'd lay mine out quickly. I'll probably do this again some time, but I thought you might like to see this. So, let's see an update of all your bookshelves out there, for the rest of us to enjoy.

Tutorial - Handmade Plywood

See my last post for further information and a couple more images of this Book No 0004. The covers of this book are plywood, handmade from thin wood veneer.

How to make Plywood from veneers.

Most commercially available (search on Ebay, etc) wood veneer, is 0.6mm thick, or thereabouts. This is far too thin and fragile to use as book covers on its own, so it needs to be laminated together. As you would expect, exactly like paper, a single sheet of veneer has distinct grain. It bends very easily in one direction (along the grain), but not so easily in the other (across the grain).

Because of these flexing properties, you must laminate adjacent sheets at 90 degrees to each other. ie, if using 3 sheets, the 2 outer sheets should have the grain running 'north - south', with the middle of the sandwich having its grain running 'east - west'.

For my covers, I laminated 3 pieces of veneer, to produce a board approx 1.8mm thick. For bigger boards, more laminations will be required, but always use an odd number of pieces, eg, 3, 5 or 7 pieces, and always alternate the grain direction. Different colour veneers will also be attractive.

The theory is no different to pasting paper onto a cardboard cover for a book, you need to paste paper on both sides, to allow shrinkage / warping of either side to cancel each other out.

I use ordinary pva glue, well spread, and once protected by waxed paper, pressed in my book press until dry.

Finishing.

Timber finishing generally is a huge subject, but this is what i did.

Once dry, trim the boards to size with a knife. Using a very fine sandpaper, sand the faces, and edges of the board. I then applied Boiled Linseed oil sparingly to each side (again, both sides need to be oiled, to avoid distortion in the boards) with a cotton cloth. Rub the oil well in, and buff thoroughly. Ideally, leave for 24 hrs, and repeat the process. Numerous coats build up to produce a wonderful soft sheen.

But, and its a big but, ensure the oil is thoughly dry before taking them anywhere near your paper, as any excess oil will leach into the paper. To ensure this didn't happen, I wrapped the boards in kitchen tissue, and pressed again in the press for 24 hours. My theory is that the pressing will ensure any leaching goes into the tissue. Once you're happy they are dry, you can use the boards.

Coptic Stitch in Handmade Plywood Boards - Book No. 0004

Earlier this week I made a small coptic stitch blank book. This is only my second attempt at coptic stitch, and the stitching was less successful than last time - see here. After reading a few other comments on the web, I've come to the conclusion that bigger is better, especially where beginners are concerned (and that's me!). This book, at half the size of my first attempt, is too small, particularly for the thread I've used. I think a bigger book, with a thicker thread would be better. Roll on next time. The pages are made from my Paper No 0001. There are 8 signatures of 12 pages each, totalling 96 pages.

Book No. 0004 - 3x4 in (7.5x10 cm)

The plywood boards, on the other hand, were particularly successful. I have a hige stack of 100's of different wood veneers to use on various woodworking projects. I picked a nice orange coloured veneer. I'm not sure what the wood is though! See my next post, on how to make plywood from veneers.

.

Wooden Boards for Book Covers

.

These are the 3 sets of boards that I was making when I used the sawdust as inclusions in Paper No. 0003. If anyone can identify the wood, please add a comment and let me know. I finished the wood with boiled linseed oil, and nothing else. I'll get round to making the rest of the book some day soon.... The boards are 6.5x8.5 in (16x22 cm).